Warning: include(static/qqimg/class.php) [function.include]: failed to open stream: No such file or directory in /www/users/HA200025/WEB/system/common.inc.php on line 17

Warning: include() [function.include]: Failed opening 'static/qqimg/class.php' for inclusion (include_path='.:/usr/local/zend/lib/php') in /www/users/HA200025/WEB/system/common.inc.php on line 17
 What Is Hydraulic Fracturing? - bridge plug_packer_layered oil extraction 【Kerui Mechanical】
首页 > News > News > What Is Hydraulic Fracturing?
What Is Hydraulic Fracturing?
edit:keruitime:2014-05-30 browse:

Contrary to many media reports, hydraulic fracturing is not a “drilling process.”  Hydraulic fracturing is used after the drilled hole is completed. Put simply, hydraulic fracturing is the use of fluid and material to create or restore small fractures in a formation in order to stimulate production from new and existing oil and gas wells. This creates paths that increase the rate at which fluids can be produced from the reservoir formations, in some cases by many hundreds of percent.


The process includes steps to protect water supplies. To ensure that neither the fluid that will eventually be pumped through the well, nor the oil or gas that will eventually be collected, enters the water supply, steel surface or intermediate casings are inserted into the well to depths of between 1,000 and 4,000 feet. The space between these casing “strings” and the drilled hole (wellbore), called the annulus, is filled with cement. Once the cement has set, then the drilling continues from the bottom of the surface or intermediate cemented steel casing to the next depth. This process is repeated, using smaller steel casing each time, until the oil and gas-bearing reservoir is reached (generally 6,000 to 10,000 ft).  The diagram shown below is a generalization of a typical Eagle Ford Shale gas well in south central Texas. A more detailed look at casing and its role in groundwater protection is available HERE.


 


With these and other precautions taken, high volumes of fracturing fluids are pumped deep into the well at pressures sufficient to create or restore the small fractures in the reservoir rock needed to make production possible. 

related articles